SPS 2026 · Nuremberg · 24–26 NovHall 6, Stand 6-350M · Automation meets IT
Twenty minutes with the people who build Single Pair Ethernet for the last hop: plant retrofits, periCORE integration for device makers, and partner conversations. Book a slot before the show and we'll be ready for you.
Request a meeting Where to find usThe stand is small and the days are short, so we pre-book meetings around three conversations. Tell us which one is yours and we'll put the right person in front of you, with hardware on the table.
Sensors and actuators onto IP over a single pair, without touching the PLC or the control layer. Bring a use case — OEE, compressed air, condition monitoring — and we'll map it onto the rig on the stand, then talk through what the same setup looks like on your line.
For plant operators, maintenance and automation engineers, system integrators.
periCORE is the embedded module and firmware that gives your device a native Ethernet identity over Single Pair Ethernet. A 20-minute integration review with our product management covers electrical interface, firmware model and what your roadmap gains.
For OEM product managers and hardware or firmware leads.
Distributors, integrators and value-added resellers: we're building a partner network around a complementary proposition — control stays where it is, we add the direct IP path for more data. Let's talk territory, margin and enablement.
For channel, category and partnership leads.
No sales rotation, no stand staff reading from a script. Every pre-booked meeting is with one of the people who decide what Perinet builds and who it works with.
Georg runs Perinet's commercial side and the partner programme. He's the person for pricing and rollout planning, distribution and integration partnerships, and any conversation that ends with a project.
Book Georg for: plant & retrofit projects, partner and channel discussions, commercial terms.
Chris owns the product roadmap across periNODE, periMICA and periCORE. Bring your electrical interface, firmware model or integration question and you'll get an answer, not a follow-up.
Book Chris for: periCORE integration reviews, technical deep-dives, roadmap and feature questions.
Karsten founded Perinet and leads the company. He is on the stand throughout the show and joins selected meetings — if yours is one of them, your confirmation will say so.
Meet Karsten for: strategic partnerships, OEM and embed programmes, the long view on Single Pair Ethernet.
Tell us who you are and what you'd like to cover. We confirm within two working days with a time, a place and the name of the person you'll meet.
We have a limited number of complimentary three-day visitor passes. Ask for one in the meeting request above and we'll email you a personal code to redeem at sps.mesago.com.
On the "Automation meets IT" joint stand, the IT-meets-OT area of the show — between TopM Software and logiccloud.
Enter via Hall 6 or use the passage from Hall 7. The AMI stand sits in the centre block of the hall, across the aisle from Endian and BE.services.
The full range on the bench, and a live rig: periNODE modules on real sensors and a lamp, switching and reporting over a single pair, with the periMICA interface open on screen so you can see the data arrive. Ask for a look even without a booking — if we're in a meeting, we'll take your card and find you.